Average Reviews:
(More customer reviews)Let's all agree that it does not require an advanced degree in computer science to program a remote control. In the case of the MX-450, neither does it require a "Professional" installer (whatever THAT means).
If you know or can figure out with a little bit or web surfing (a) which components need to be turned on and what inputs and outputs should be selected, (b) what is the difference between IR and RF, (c) what an IR emitter or blaster is, (d) what a delay is, and (e) that you need a Power Off macro to turn off all the devices in your system, you can easily program this remote. It might take a little bit of trial and error and a little bit of patience, but no more than any other "Consumer" remote control that I have seen so far.
Put another way: If you can read the directions and figure out how to program a Logitech Harmony remote at some basic level (and especially if you have already done so), you can read the directions and figure out how to program this one and probably in less time. You might have to start over again once or twice while you get familiar with the guided setup, but the step-by-step software is so simple that even a "professional" installer could probably figure it out :)
My experience: I initially owned a Universal Remote Corporation MX-900 which was installed and programmed for me by a "Professional" AV company that shortly thereafter went out of business. I was irritated at URC because they would not provide me with access to the programming software for my MX-900. They said it was for "Licensed Dealers Only" which is their way of saying "Professionals". It was a great remote, but I was no longer willing to pay somebody $300 every time I wanted to tweak the picture or add/upgrade a component (e.g., adding an XBox, swapping the DVD for a Blu-Ray, etc.) and a few things with the way mine was programmed were really irritating.
To replace that, I purchased a Logitech Harmony 900 and had the exact experience as everyone else who purchased it did: bad RF range and performance. I tried every creative workaround you could think of, to no avail. If the RF worked, it would be a great remote. But it doesn't.
URC adveritizes this remote as being for "Professionals", which initially scared me off, but the cool thing about the MX-450 for the DIY folks like me is that, since you don't need a PC, there is no software required to program the remote.
Correcting some previous reviews, URC offers for download from its web site support section a helpful Archiver program that allows you to update the remote firmware and ir codes database via a USB cable -- just like the Harmony remotes, but much simpler. It also allows you to make a backup copy of your remote configuration in case you have a problem later on and need to do a factory reset or restore your settings. (For the non-pros like me, I strongly recommend making multiple backups along the way as you add more and more cool macros and other programming.)
In my case, I spent about an hour surfing through the internet reviews and reading the 12 page manual before I took the thing out of the box. It probably took me another 4 hours in total to program the remote over the course of one evening. That includes my Denon AVR receiver, my Sony TV, my Sony Blu-Ray player, my AppleTV, my Xbox, my HDRadio and my wife's Wii Fit (all hidden in the next room and connected to our whole-house audio system). I used the macro feature to create six macros on the Main page that emulate Harmony-style "Activites" -- e.g., to watch Tivo, you press the "Watch Tivo" button and the remote does the rest. Favorite channels can be done in under 10 minutes. It probably took me another half-hour to install the IR emitters, the base station and the RF antenna and do the RF programming on the remote to make each component RF only with its own ir address. BTW, the URC manual for the MRF 350 base station is really easy to follow and the RF settings on the remote itself are self-explanatory.
The guided programming is not as elegant as what you can do on a PC, and I had to start programming devices or macros over again once or twice, but the learning, macro and cut and paste functions are really helpful and easy. You can do just about anything that you can think of with this remote so long as you are a little bit organized. My unit gives me RF range to almost 100 feet through two interior walls and the performance has been reliable, even during long macros.
I highly recommend this as an alternative to other high-end RF remotes for DIY folks like me.
Click Here to see more reviews about:
Universal Remote Control MX-450 Custom Programmable Remote Control with On-Screen Macro Editing.The Universal Remote MX-450 is a future featured remote control with a color screen.It can be programmed to use RFcontrol with the addition of the MRF-260 base station.This means you do not have to point the remote at the device you are controlling to adjust your settings.
Click here for more information about Universal Remote Control MX-450 Custom Programmable Remote Control with On-Screen Macro Editing.
